Panasonic VL-W1-N Series, Руководство по установке и обслуживанию

Страница: 108 / 176

108
4-5 Shutter Close Output
To monitor the shutter close state, independent double output signals of SHUTTER CLOSE 1 OUT and SHUTTER CLOSE
2 OUT are equipped on the controller.
Connect these signals to the external safety control unit to ensure the shutter status of the laser system.
4-5-1 Shutter close output terminal
Shutter close output terminal is equipped on the rear side of the controller.
Connector type Model Manufacturer name
On the laser welding
machine side
Dedicated connector DFK-MC 1.5/ 7-GF-3.81 Phoenix Contact
User side Attached accessory:
FK-MCP1.5/7-STF-3.81
No. Name Description
1 SHUTTER CLOSE OUT COM. Output common terminal for SHUTTER CLOSE 1 OUT (No. 2) and
SHUTTER CLOSE 2 OUT (No. 3).
2 SHUTTER CLOSE 1 OUT Both SHUTTER CLOSE 1 OUT and SHUTTER CLOSE 2 OUT turn ON
when the shutter in the head is closed.
Connect these signals to the external safety control unit, such as a safety
PLC, to construct the safety monitoring system.
SHUTTER CLOSE 1 OUT and SHUTTER CLOSE 2 OUT will be output
by the same operation, but their output timing has a margin of error.
While SHUTTER CLOSE 1 OUT and SHUTTER CLOSE 2 OUT are
turned ON, the LED indicators on the rear of the controller light up.
3 SHUTTER CLOSE 2 OUT
4-7 RESERVE Do not connect anything.
Shutter close output
(Terminal No. 1 to 3)
Power data output
(Terminal No. 4 to 7)
1 2 3 4 5 6 7
Shutter close output
(Terminal No. 1 to 3)
Rear of controller
ME-VLW1N-SM-1