Accessories / Options
Quick Start Guide
10
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1
Remove the assembly screws from the TV.
2
Pull out the pedestal from the TV.
3
Remove the assembly screw from the cover.
4
Remove the assembly screws from the bracket.
5
Remove the assembly screws from the back of the base and pull out the neck.
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
(View from the top)
TX-P42GT50B: 15°
TX-P50GT50B: 10°
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
Screw (not supplied)
Diametre: 3 mm
Length: 25 - 30 mm
Screw hole
