Panasonic Vericam 35, Руководство по эксплуатации

Страница: 31 / 119

– 31 –
Chapter 3 Preparation — Setting the date/time of the internal clock
Setting the date/time of the internal clock
The value of the time is recorded to content (clips) and affects the thumbnail playback order. Before recording, be sure to check and set the date and
time zone.
1
Press the <MENU> button.
f
The [MENU] screen is displayed on the control panel.
2
Select [MENU] → [SYSTEM SETTINGS] → [CLOCK] → [CLOCK SETTING] to set the year, month, day, and time.
The year setting upper limit is 2037. For details on the settings menu, refer to “Setting menu basic operations” (page 83).
3
Select [MENU] → [SYSTEM SETTINGS] → [CLOCK] → [TIME ZONE] to set the time difference from Greenwich Mean Time.
The time zones are always recorded as metadata together with date/time.
@ @ NOTE
t
You can correct the date and time of the internal clock from GPS by enabling the GPS function.
r
Time zone table
Time difference Region Time difference Region
00:00 Greenwich + 01:00 Central Europe
− 00:30 + 01:30
− 01:00 Azores + 02:00 Eastern Europe
− 01:30 + 02:30
− 02:00 Mid-Atlantic + 03:00 Moscow
− 02:30 + 03:30 Tehran
− 03:00 Buenos Aires + 04:00 Abu Dhabi
− 03:30 Newfoundland + 04:30 Kabul
− 04:00 Halifax + 05:00 Islamabad
− 04:30 + 05:30 Bombay
− 05:00 New York + 06:00 Dakar
− 05:30 + 06:30 Yangon
− 06:00 Chicago + 07:00 Bangkok
− 06:30 + 07:30
− 07:00
Denver
+ 08:00 Beijing
− 07:30 + 08:30
− 08:00 Los Angeles + 09:00 Tokyo
− 08:30 + 09:30 Darwin
− 09:00 Alaska + 10:00 Guam
− 09:30 Marquesas Islands + 10:30 Lord Howe Island
− 10:00 Hawaii + 11:00 Solomon Islands
− 10:30 + 11:30 Norfolk Island
− 11:00 Midway Islands + 12:00 New Zealand
− 11:30 + 12:45 Chatham Islands
− 12:00 Kwajalein Atoll + 13:00
+ 00:30
@ @ NOTE
t
Be sure to make this setting before using the camera for the first time. After, do not change the setting during use.
t
Clock accuracy is a lunar inequality of approximately ±30 seconds with the power off. When accurate time is required, check and reset the time when
the power is turned on.
Note that if the time is received using the built-in GPS, the time of the internal clock (local date and time) is maintained accurately based on the time
received (Greenwich mean time) and the time zone.
If the time display of the internal clock is different from the local time, the time zone setting may be incorrect. Check the time zone setting again
(internal clock does not need to be set again).
t
The internal clock runs for several years on the built-in lithium cell of the camera. When the lithium cell runs out of power, [BACKUP BATT EMPTY] will
be displayed in the viewfinder when the camera is turned on. For details, refer to “Maintenance” (page 107).