Panasonic Vericam 35, Руководство по эксплуатации

Страница: 83 / 119

– 83 –
Chapter 10 Menu Operations — Setting menu display
Setting menu display
Setting menu basic operations
You can change camera settings using the setting menu according to the shooting scene and recording details.
Set data are written and saved in the internal memory of the camera.
b
a
c
a: <MENU> button
b: <EXIT> button
c: Jog dial button
1
Press the <MENU> button when not recording.
f
The [MENU] screen is displayed on the control panel.
2
Turn the jog dial button to place the cursor on the desired menu item.
f
Turn the jog dial button to move the cursor vertically.
3
Press the jog dial button.
f
The next level of screen is displayed.
If there is another level, press the jog dial button again to display it.
f
The current setting value of the item selected on the right is displayed.
4
Turn the jog dial button to place the cursor on the desired item.
5
Press the jog dial button.
The item is in the setting status.
If there are two items, the setting value selection frame may be displayed on the right.
6
Turn the jog dial button to place the cursor on the desired item.
7
Press the jog dial button.
Setting is completed.
8
Press the <EXIT> button to close the menu.
Setting menu initialization
The values set in the setting menu can be reset to the factory setting.
1
Select [LOAD FACTORY DATA] from [MENU] → [SYSTEM SETTINGS] → [INITIALIZE].
[MENU] setting values are reset to factory settings.