Re
cording
Before recording
51
LSQT1025
∫
About auto mode
Set the AUTO/MANUAL/FOCUS switch to AUTO,
and colour balance (white balance) and focusing will
be adjusted automatically.
– Auto white balance (
l
161)
– Auto focusing (
l
162)
Depending on the brightness of the subject etc., the
aperture and shutter speed are automatically
adjusted for an optimum brightness.
(When set to the disc recording mode: The shutter speed is adjusted to a maximum of 1/250.)
≥
Colour balance and focus may not be adjusted automatically depending on light sources or
scenes. If so, manually adjust these settings.
– Scene mode setting (
l
75)
– White balance setting (
l
78)
– Shutter speed setting (
l
80)
– Iris/gain value setting (
l
80)
– Focus setting (
l
77)
∫
Anti-Ground-Shooting (AGS) (VDR-D300 only)
This function prevents unnecessary recording when you forget to pause
recording and walk with the unit tilted upside down while recording continues.
≥
If the unit continues to be tilted upside down from the normal horizontal
position while recording on a disc, it is automatically put into recording pause.
Turning the AGS function on/off
¬
Rotate the mode dial to select
.
Press the MENU button, then select [
SETUP]
#
[
AGS]
#
[ON] or [OFF] and press the joystick.
AGS
≥
The AGS function may activate and cause the unit
to pause the recording if you are recording a subject
right above or right below you. In these cases, set
[AGS] to [OFF] then continue the recording.
≥
Use the recording start/stop button to pause the
recording. The AGS function is only a backup
function for when you forget to pause the recording.
≥
The time it takes the unit to be put into recording
pause after being tilted upside down varies
depending on the operating conditions.
LSQT1025(ENG).book 51 ページ ２００６年２月４日 土曜日 午後６時１０分
