Dis
c
a
nd c
a
rd
ma
na
ge
me
nt
Formatting discs and cards
104
LSQT1025
Disc and card management
(RAM)
(-RW‹VR›)
(-RW‹V›)
Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬
Rotate the mode dial to select
.
1 Press the MENU button, then select [
SETUP]
#
[
FORMAT DISC]
#
[YES] and press the
joystick.
≥
When formatting a DVD-RAM, skip to step 3.
2
(When formatting a DVD-RW only)
Select format type (
l
21), then press the joystick.
3 When the confirmation message appears, select [YES], then press the
joystick.
≥
When formatting is complete, press the MENU button to exit the message screen.
Formatting discs and cards
Formatting discs
This is for initializing discs.
≥
In the case of a double sided disc, format each side.
≥
It may not be possible to format a disc with many
scratches or dirt. Such discs cannot be used.
≥
During formatting, do not turn this unit off.
≥
When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
Formatting DVD-RAM:
≥
We recommend formatting on this unit. If formatting
on a computer, use the supplied software. For more
details, refer to the operating instructions of the
software.
If you connect this unit to a computer to format a
DVD-RAM, you cannot use DVDForm (
l
119) to
physically format it. Use a separate DVD-RAM drive
to physically format a DVD-RAM.
Formatting DVD-RW:
≥
Format on this unit.
LSQT1025(ENG).book 104 ページ ２００６年２月４日 土曜日 午後６時１０分
