Pre Installation Information
10
To install your machine as an SMTP mail server, the following network parameters need to be programmed
on your network and on your machine.
• IP Address of the DNS Server (If not available, see Note 2)
• IP Address of your machine
• Subnet Mask of your machine
• Name or IP Address of the Default SMTP mail server
• IP Address of the Default Gateway
• Email Address of your machine (See Note 1)
• Host Name
• SMTP Authentication Name (When authentication with the SMTP server is required)
• SMTP Authentication Password (When authentication with the SMTP server is required)
Email (From your machine to a PC) and Direct IFAX XMT Transmission
Email (From a PC to your machine) and Direct IFAX XMT Reception
NOTE
1. To function as an SMTP mail server, your machine's email address must include its unique
Host name within your company domain. This unique Host name must be registered within
your network’s DNS (Domain Name System) server.
Ex:
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP Server Name. If the DNS Server is not available, change the Fax Parameter No.
161 (DNS SERVER) to "1:INVALID". The machine will then prompt you to enter the IP
Address of the SMTP Server.
Setup as SMTP Mail Server
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
SMTP
POP3
Direct IFAX XMT Router
(Gateway)
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP
Direct IFAX XMT Router
(Gateway)
Содержание UF-6300
Страница 63: ...63 memo Basic Operations ...