Troubleshooting
92
Information Codes
412
No data from the transmitting side.
Check with the other party.
--
414
Polling password does not match.
Check the polling password.
--
415
Polling transmission error.
Check the polling password.
--
416/417
418/419
Received data has too many errors.
Check with the other party.
--
420/421 Machine goes to receiving mode, but receives no
command from the transmitting side.
1. Remote side misdial.
2. Check with the other party.
--
422/427 Interface is incompatible.
Check with the other party.
--
434
Communication error occurred while receiving.
Check with the other party.
--
436/490 Received data has too many errors.
Check with the other party.
--
456
• Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions:
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing received document.
• Unit was requested to relay a document under any of
conditions described above.
1. Print a File List and check the contents.
2. Wait until unit finishes printing.
--
493/ 494 Communication error occurred while receiving.
Check with the other party.
--
495
Telephone line disconnected.
Check with the other party.
--
501/502 Communication error occurred using the internal V.34
Modem.
Check with the other party.
--
540/541/
542/543/
544
Communication error occurred while transmitting.
1. Reload the document and send again.
2. Check with the other party.
--
550
Telephone line disconnected.
Check with the other party.
--
553/554/
555
Communication error occurred while receiving.
Check with the other party.
--
580
Sub-address transmission to a unit that has no Sub-
address function.
Check the remote station.
--
581
Sub-address Password transmission to a unit that has
no Password Sub-address function.
Check the remote station.
--
623
No document loaded on the ADF.
Reload the document and send again.
--
630
Redial was not successful due to a busy line.
Reload the document and send again.
--
631
During dialling, STOP was pressed.
Reload the document and send again.
--
634
Redial was not successful due to no response from
the called station or wrong number dialled.
Note
: If busy tone was not detected, the machine will
only redial once.
Check the telephone number and send again.
--
638
Power failure occurred during the communication.
Check the power cord and plug.
711
Incorrect LDAP settings.
Check the LDAP Server Name, LDAP Log in
Name, LDAP Password, LDAP Search Base.
712
Incorrect email address.
Check the registered email address.
Check the IP Address of the SMTP Server
with the Network Administrator.
--
714
Cannot Log on to the LAN.
Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.
--
715
TCP/IP connection timed out.
Check the Internet Fax parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address.
--
Info.
Code
Meaning
Action
page
Содержание UF-6300
Страница 63: ...63 memo Basic Operations ...