manualshive.com logo in svg

Panasonic UF-4500, Руководство по обслуживанию

"Panasonic UF-4500 - Многофункциональный факс с принтером и копированием. Наши пользователи могут бесплатно загрузить "Руководство по эксплуатации" с нашего веб-сайта. Описание функций и настроек доступно для скачивания по запросу. Обязательно загрузите его с {веб-сайта}!"

Поделиться
Скачать
background image

250

UF-5500 / 4500

13.6. Updating the Firmware

Unlike other machines with removable EPROM (Erasable Programmable ROM), this machine is equipped with an USB Port as
standard. The firmware of the machine can be updated with a PC via the USB Port of the unit. (Refer to Service Mode 9 (System
Maintenance))
The following is the basic procedure to update the firmware of the machine. The details are described in the Firmware Update Tool 
Operating Instructions.

13.6.1 Updating the Firmware using a PC via the USB Port

Note: 

For the USB Port Models, do not connect the USB Cable in the beginning. The Plug & Play of the Printer mode is activated when 
the USB cable is connected without the unit set in the USB Firmware Update Mode. If this happens, please click the [Cancel] 
button for the Plug and Play Driver installation.

1. Before starting, print the Fax and Function Parameter Lists.
2. Install the Firmware Update Tool to the PC. 

(Refer to the Local Firmware Update Tool Operating Instructions)

3. Perform the Service Mode 9-1 (Firmware Update).

Now the machine is ready to accept programming firmware code from the PC.

4. Connect the machine to the PC with the USB Cable.

(UF-4500 only : USB port of UF-4500 is covered with the sheet.
 Remove the sheet when connecting USB cable and put the sheet back to original place when update is complete.)

5. Start the Firmware Update Tool using the Wizard.
6. The firmware is copied into the machine.
7. After the update is completed, the machine reboots itself and returns to standby.

8.

Confirm parameters according to the printed lists in Step 1. if the settings are different.

13.6.2. Updating through a LAN Port (UF-5500 only)

The firmware code can be easily updated when the main unit is connected to a LAN. 
The Network Firmware Update Tool can also be used by connecting to the machine using a crossover cable, if the unit is not con-
nected to a LAN.

1)

Install the Network Firmware Update Tool to your PC

The Tool can be downloaded from your sales company’s Web Site. Please refer to the Tool’s Operating Instructions file for 
additional details.

2) Preparing the Firmware Code

Access the Service Web site to download the latest Firmware Code, and store to your PC folder.

Example:
   From:

   Firmware Code File :                        UF-5500-xx_xxxxxx.exe

   To:

   Firmware Data Folder:                     C:\ Panasonic \  Panasonic-FUP \ Data

3) Preparing the Main Unit for the Firmware Upgrade

Make sure the unit's Password is the same as the tool's password.
Make sure the unit is in an idle state (e.g. not making copies, not printing, etc.).

4) Upgrading the Main Unit's Firmware Code

Start the Network Firmware Update Tool and select the Firmware Data folder, and then follow the display instructions to
upgrade the Main Unit's Firmware Codes.

5) Confirmation

After the update is completed, the machine reboots itself and returns to standby.
Confirm parameters according to the printed lists in Step 3) if the settings are different.

Note:

1.Manual mode must be used, when updating the designated version of the firmware or changing the type of the firmware.

Please refer to the Section 2.2, 

“Setting up the Network Firmware Update Tool, File Selection Tab” 

of the Operating 

Instructions.

2.While updating the firmware code, the display may become garbled, however, it will return to normal upon completion of the 

firmware update.

3.If the firmware update fails and the unit does not boot up, the Network Firmware Update Tool will not be able to transfer the 

firmware code. If this occurs, please refer to Firmware Emergency Recovery with the USB Port and use the Local Firmware 
Update Tool to recover the unit.

4.The suffix "_xx" for the Folder Name or File Name may not exist depending on the destination location

.

Содержание UF-4500














































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для UF-4500

Oki OKIOFFICE 87 Setup Manual preview
OKIOFFICE 87
Бренд: Oki Страницы: 28
Leather Machine COBRA CLASS 3 Maintenance And Tips preview
COBRA CLASS 3
Бренд: Leather Machine Страницы: 4
Savin Savinfax 3670 Operator'S Manual preview
Savinfax 3670
Бренд: Savin Страницы: 143
R.P.S. Corporation GTX 26'' DISK Operating Instructions Manual preview
GTX 26'' DISK
Бренд: R.P.S. Corporation Страницы: 42
Singer 990B3 Service Manual preview
990B3
Бренд: Singer Страницы: 54
Ultraflex Easy Melt Air 1G Operation Manual preview
Easy Melt Air 1G
Бренд: Ultraflex Страницы: 22
Singer 144 A 104 Operator'S Manual preview
144 A 104
Бренд: Singer Страницы: 7
Singer 44-26 List Of Parts preview
44-26
Бренд: Singer Страницы: 47
Truvox Hydromist Lite User Instructions preview
Hydromist Lite
Бренд: Truvox Страницы: 16
Duerkopp Adler 559 Service Instructions Manual preview
559
Бренд: Duerkopp Adler Страницы: 77
JUKI DDL-5550N Instruction Manual preview
DDL-5550N
Бренд: JUKI Страницы: 48
Crane P Series Manual preview
P Series
Бренд: Crane Страницы: 11
Sase PDG 8000P Manual preview
PDG 8000P
Бренд: Sase Страницы: 73
SunStar KM-590BL User Manual preview
KM-590BL
Бренд: SunStar Страницы: 23
Panasonic KX-PW720DLE6 Quick Reference Manual preview
KX-PW720DLE6
Бренд: Panasonic Страницы: 24
White 1521 Instruction Manual preview
1521
Бренд: White Страницы: 39
Newlong DKN-2 Instruction Manual & Parts List preview
DKN-2
Бренд: Newlong Страницы: 28
Muratec M-1250 Operating Instructions Manual preview
M-1250
Бренд: Muratec Страницы: 88

Бренды по названию

Популярные бренды

Загрузить еще бренды