Panasonic UB-5338C, Руководство по обслуживанию

Страница: 34 / 136

34
U307035 USB Flash
Memory Device
Write-protection The USB Flash Memory
Device has been set to
write-protect. 1. Cancel the write-protection.
U307037 FAT 16 Format
Error USB Flash Memory Device
with a un-supported FAT16
Format is set to this unit. 1. Re-format the USB Flash Memory Device with the FAT32
Format.
U307144 USB Flash
Memory Device
Write Error USB Flash Memory Device
Write Error occurred. 1. Check whether the USB Flash Memory Device can be
correctly written with a PC.
U307160 Same as "U307014"
U307161 Same as "U307001"
U308001 Un-supported
Printer Connection A un-supported printer for this
unit is connected. 1. Connect a printer that meets the requirements of this unit.
U308002 Printer Paper
Empty Paper set in the printer is
empty. 1. Set paper in the printer according to the Operation
Instructions for the printer.
U308003
U308004 Printer Error There is a Printer error. 1. Fix the printer error according to the printer manual.
U314161 Un-supported
Printer Connection A un-supported printer for this
unit is connected. 1. Connect a printer that meets the requirements of this unit.
U314224 Printer Error The printer does not work
correctly. 1. Restart the printer and then check its operations.
U314225 Printer Ink Empty The ink in the printer is empty. 1. Replace the ink cartridge according to the Operation
Instructions for the printer.
U314226 Printer Paper
Empty Paper set in the printer is
empty. 1. Set paper in the printer according to the Operation
Instructions for the printer.
U314227 Printer Paper Jam A paper jam in the printer
occurred.
1. Remove the jamming paper in the printer.
U314228 Printer Working The printer is working now. 1. After confirming that the printer changes to “Ready”,
perform the copy function for the printer.
U314229
U314231 Printer
Communication
Error During printing, an error of the
communication between the
printer and this unit occurred. 1. After confirming the connection between the printer and
Panaboard, restart the printer and then check its operations.
U402002 No Output Device There is no device to output. 1. Set a USB Flash Memory Device, a SD Memory Card,
a printer, or a PC that meets the requirements of
this unit.
U403012 Screen Feed Error 1. Screen Film did not reach
its home position.
2. The Home Marker is peeled
off.
3. Home Sensor did not work
correctly.
1. Check whether the Home Marker is attached on the Screen
Film.
2. Check the connection between CN4 (CONTROL Board)
and CN800 (MOTOR DRIVE Board).
3. Check the connection between CN802 (MOTOR DRIVE
Board) and Motor.
4. Check the soldering conditions of IC800 and Q800 on the
MOTOR DRIVE Board.
5. Check the soldering conditions of IC9 and R280 to R283
on the CONTROL Board.
6. Replace faulty parts, Motor, MOTOR DRIVE Board, or
CONTROL Board.
U403021 Same as "U103021"
U403022 Same as "U103022"
U403023 Same as "U103023"
U403024 Same as "U103024"
U403025 Same as "U103025"
U406010 SD Memory Card
Full
The available space in the SD
Memory Card became full
while scanning.
Make the available space with a PC and then scan again.
U406035 Same as "U306014"
Error Code Possible Cause Check Point
Display Code Name