Panasonic UB-5335, Руководство по эксплуатации

Страница: 16 / 38

16
Part Names and Functions
Menu Key
Press to change the basic settings of this unit. (Enter setting mode)
(
☞
page 28)
In setting mode: Selects items or values to set. (
☞
page 28)
2-Screen
Copy Key
This key causes the front and back of the screen to be copied on a single
sheet of paper. (
☞ page 20)
In setting mode: Selects items or values to set. ( ☞ page 28)
Multi-Copy/
Stop Key
Set the total number of copies to be made using the printer.
Keep pressing the key until the desired number of copies appears in the
Display Window. (
☞ page 20)
This key can also be pressed while copies are being made to stop the
copying process.
In setting mode: Switch between setup of each item. (
☞
page 28)
Advance Key
The screen film will advance from right to left, and it will switch from the
front to the back or vice versa.
Copy Key
The front of the screen film will be copied.
•
Printer output:
The display indication changes while multiple copies are being made
as shown below. After reaching “ ”, the display will reset to “ ”.
Example: 5
4 3 2 1 0 1
(When multi-copy function is used, the total number of copies is
decremented by one each time a copy is made.)
•
USB flash memory device output: “ ” will change to “ ”, then back
to “ ”.
•
Computer output: “ ” will change to “ ”, then back to “ ”.
When a printer error has occurred during coping, first release the error,
and then resume printing.
•
If the copy paper has run out while using multi-copy function, load the
copy paper, and press the Copy Key again. The remaining copies will
now be printed.
• Release the printer error U11 to U14 ( ☞ page 34) which occurred
during printing, and press the Copy Key again to resume printing.
No. Panel Name Description
UB-5335&5835&5365&5865-PNQX5932ZA-mst.book 16 ページ ２０１２年１１月１２日 月曜日 午前９時４２分