Panasonic TY-WK98PV1, Руководство по установке

Страница: 19 / 28

ENGLISH
- 19
Attaching (continued)
Attaching the Bracket to the Wall
Attention
z
When attaching the bracket to the wall, use bolts for which the height of the head portion will be 11 mm (0.43")
or less including the thickness of the washer.
If the height of the head portion of the bolts exceeds 11 mm (0.43"), the bolts will interfere with the display unit
and damage it.
11 mm (0.43") or less
OK OK
NG NG
D
E
F F
Wall mounting holes of
base plates (upper)
Wall mounting holes of
base plates (lower)
A
B
Positioning hole
Center of bracket
Center of
display unit
Exceeded Exceeded
Screw installa-
tion position
Screw installa-
tion position
Lock screw
C-2 or C-3
Lock screw
C-2 or C-3
Cutout
Install the lock screw on either the left or the right.
1) Attach the bracket to be attached to the wall
surface to the wall.
z
The center of the positioning hole is the center of
the display unit.
A
Attach the bracket so that the cutouts of the
base plates are at the top.
B
Fix the place with the positioning hole in the
base plate (upper) to the wall with a bolt.
C
Use a level gauge to correct any tilting of the
bracket.
D
Fix the four remaining places with mounting
holes in the base plate (upper) to the wall with
bolts.
E
Fix the five places with mounting holes in the
base plate (lower) to the wall with bolts.
F
Use a screwdriver to install the lock screw
(M5x200) in the base pate (lower).
(Tightening torque: 1.4 to 1.6 N•m)
z
There are lock screw installation parts on the
left and right of the bracket.
The lock screw tightening work will be
performed after the bracket is attached to the
display unit, so install the lock screw in the
one for which work space can be provided.
z
If the lock screw is longer than the display unit
when installed, replace it with the lock screw
(M5x70).
z
Tighten the lock screw so that it does not
exceed past the screw installation position of
the base plate (lower) as shown in the figure.
Tightening the screw so that it exceeds past
the screw installation position is dangerous
because the display unit will not be able to be
installed in a normal position.
Also, the wall-hanging bracket or display unit
may be damaged.