Panasonic TY-WK98PV1, Руководство по установке

Страница: 14 / 28

14 -
ENGLISH
Assembling the Bracket to Match the Display Unit Installation Pitch (continued)
When center base plate is 800, 600, or 500
A
B
C
Base plate upside
(R)
A-2
Base plate upside (L)
A-1
Center base plate
800 A-5
600 A-6
500 A-7
Positioning hole
Spacer plate A-9
1) Assemble the base plate (upper).
A
Place base plate upside (R) over the left side of
the center base plate and fix it in place with four
countersunk screws.
B
Place base plate upside (L) over the right side
of the center base plate and fix it in place with
four countersunk screws.
C
Place the spacer plate over the positioning hole
of the center base plate and fix it in place with
two countersunk screws.
(Tightening torque: 1.4 to 1.6 N•m)
When center base plate is 400
A
B
Base plate upside
(R)
A-2
Base plate upside (L)
A-1
Center base plate 400 A-8
A
Place base plate upside (R) over the left side
of the center base plate and fix it in place with
three countersunk screws.
B
Place base plate upside (L) over the right side
of the center base plate and fix it in place with
three countersunk screws.
(Tightening torque: 1.4 to 1.6 N•m)
When center base plate is 800, 600, or 500
A
C
B
Base plate down-
side (R)
A-4
Base plate down-
side (L)
A-3
Center base plate
800 A-5
600 A-6
500 A-7
Positioning hole
Spacer plate
A-9
2) Assemble the base plate (lower).
A
Place base plate downside (R) over the left side
of the center base plate and fix it in place with
four countersunk screws.
B
Place base plate downside (L) over the right
side of the center base plate and fix it in place
with four countersunk screws.
C
Place the spacer plate over the positioning hole
of the center base plate and fix it in place with
two countersunk screws.
(Tightening torque: 1.4 to 1.6 N•m)
When center base plate is 400
A
B
Base plate down-
side (R)
A-4
Base plate downside (L)
A-3
Center base plate 400
A-8
A
Place base plate downside (R) over the left side
of the center base plate and fix it in place with
three countersunk screws.
B
Place base plate downside (L) over the right
side of the center base plate and fix it in place
with three countersunk screws.
(Tightening torque: 1.4 to 1.6 N•m)