![background image](http://html.mh-extra.com/html/panasonic/ty-wk98pv1/ty-wk98pv1_installation-instructions-manual_280552013.webp)
ENGLISH
- 13
Assembling the Bracket to Match the Display Unit Installation Pitch (continued)
Assembling the Bracket to Be Attached to the Wall Surface
Attention
z
The left and right base plates need to be reversed to screw in the screws from the back (surface contacting the wall).
Accordingly, perform the work with the right base plates placed on the left side and left base plates placed on the
right side.
Back (surface contacting the wall)
When bracket to be attached to the wall surface
Countersink
z
The surfaces for installing the screws have countersinks so that the countersunk screws sit flush with the surface.
Install the countersunk screws from the surfaces with the countersinks.
z
The surfaces with the countersunk screw heads will contact the display unit or wall. Installation will not be
possible if the countersunk screws are protruding so tighten the countersunk screws until their heads are not
higher than the bracket.
z
When assembling the bracket, place the plates so that the projections near the screw holes fit into the round holes.
The screws cannot be screwed in if the projections are not fitted into the round holes because the screw holes
will be misaligned.
Screw hole
Round holes
Projections
Содержание TY-WK98PV1
Страница 27: ...ENGLISH 27 MEMO ...
Страница 28: ...TP0918MY0 PS Printed in China 2018 https panasonic net cns prodisplays ...