Getting Started
Battery Installation and Replacement
6
Place your thumb on triangle on the battery cover. Apply a slight downward pressure with the thumb and
slide the cover back. This allows the cover to be removed.
Insert the batteries ensuring the correct polarity. The polarity is identified by the “ + “ and “ – “ symbols on
the battery and the “ + “ and “– “ symbols on the battery compartment. The springs inside the battery
compartment connect to the negative terminal of the battery.
Two “AA” size batteries
Fit the battery cover and slide it forward until it “clicks” into place.
Battery Precautions
*
Do Not
use rechargeable batteries. Differences in size and performance may cause
incorrect operation.
*
Do Not
mix battery types (Alkaline with zinc-carbon etc.)
*
Do Not
mix old and new batteries. Replace both batteries at the same time.
*
Do Not
attempt to recharge batteries.
*
Do Not
short circuit batteries.
*
Do Not
disassemble batteries.
*
Do Not
heat or burn batteries.
Caring for the Remote Control
The lens of the Remote Control should be kept clean and free of dirt and grease. Use a soft cloth
moistened with water and a mild detergent to keep the lens clean.
Lens
Remote Control
