
Remote Control VCR/LD/DVD Operation
Manufacturers’ Code Settings
32
This remote control has been designed to work with a variety of VCRs, Laser Discs and DVD players. In
order for this to occur, the setting for the VCR, LD or DVD must be programmed into the Remote Control.
1.
To set a VCR, press the VCR button.
To set a LD or DVD, press the LD/DVD button.
2.
Push the remote control VCR - LD/DVD Power button and keep it Pushed.
3.
Enter the Manufacturer’s two-digit code number using the remote control Number buttons (The
codes are shown below).
4.
Push the STOP button.
5.
Release the remote control VCR or LD/DVD Power button.
6.
Check the operation of the VCR, LD or DVD. If it does not operate correctly, repeat steps 1 to 5
and use an alternate code (if there is one).
VCR CODES
Manufacturer
Code
Manufacturer
Code
Panasonic /
10, 11, 12, 13
NEC
40, 41, 42, 43
National
ORION
45, 46
AIWA
15, 16
Philips
50
FUJITSU
20
SANYO
55, 56, 57, 58
HITACHI
25, 26, 27
SHARP
60, 61
JVC
30, 31, 32
SONY
65, 66, 67
MITSUBISHI
35, 36
TOSHIBA
70, 71
LD CODES
Manufacturer
Code
Manufacturer
Code
Panasonic
10, 11, 12, 13
SAMSUNG
30
KENWOOD
15, 16
SHARP
35
PHILIPS
20
SONY
40, 41, 42, 43
PIONEER
25
DVD CODES
Manufacturer
Code
Panasonic
70
NOTES:
1.
If the batteries are removed from the remote control the Manufacturer’s codes are lost and must
be reprogrammed.
2.
The list of manufacturer’s codes is given as a guideline only. Panasonic cannot guarantee that
any other manufacturer’s product will work with this remote control.
Please refer to drawing on pages 8 and 9 for location of VCR Control buttons.