POS. Setup
COLOUR SYS
26
If a clear picture with correct colours cannot be obtained, a change to the Colour System may improve the picture.
The COLOUR SYS options are AUTO, PAL, NTSC 4.43 and NTSC 3.58. The OLOUR SYS is normally set to AUTO
and generally does not need to be changed.
Using the Remote Control
1.
Push the MAIN MENU button.
Move to the PRESET Menu using the Up or
Down button.
2.
Choose the PRESET Menu by using the
Left or Right buttons.
3.
Move to the POS Setup menu using the Up
or Down button.
4.
Choose the POS Setup menu using the Left
or Right buttons.
5.
Using the Up or Down button to Choose the
COLOR SYS option.
6.
Use the Left or Right buttons to change the
COLOUR SYS option.
7.
Push the MAIN MENU button repeatedly
until you return to normal viewing.
Using the Front Panel Controls
1.
Open the front door.
2.
Press the PRE. button repeatedly until
POS.SETUP is highlighted.
3.
Choose the POS.SETUP Menu by using
the Volume Up (+) or Down (-) buttons.
4.
The COLOR SYS option will be highlighted
5.
Use the Volume Up ( + ) or Down ( - )
buttons to change the COLOUR SYS
option.
6.
Push the PRE. button repeatedly until you
return to normal viewing.
RF (Normal television) MODE
AV (Audio / Video) MODE
PRESET
SYS
SELECT
AUTO
TUNE
MANUAL
TUNE
POS
SETUP
TEXT
SELECT
GEOMAGNETIC
AUSTRALIA
ACCESS
ACCESS
ACCESS
ENGLISH
--------|-------
POS. SETUP
FINE TUNE
SKIP
AVL
CH COLOUR SET
COLOUR SYS
AUTO
ACCESS
OFF
ON
-----------|-----------
PRESET
SETUP
AVL
CH COLOUR
SET
COLOUR SYS
AUTO
ON
-----------|-----------
GEOMAGNETIC
-----------|-----------
