Panasonic TX-28DTS3 Скачать руководство пользователя

Страница: 9 / 48

TV > VCR DOWNLOAD IN PROGRESS

PLEASE WAIT

PROGRAMME : 48

REMOTE CONTROL UNAVAILABLE

TV to VCR Download

If a “Q

Link”, “

NEXTVIEWLINK”

or compatible VCR

has been connected to the AV2 socket before

starting Step 1, programme information will be

downloaded to the VCR.
Only the analogue programme positions will be

downloaded to the VCR, in the correct order.

See page 36.
Not all VCRs support this download of

programme information, some may require to be

started manually.

Refer to the VCR operating instruction book.
If a VCR other than those described above has

been connected, then there will be no download

operation. The TV is now ready for use:

BBC1

Notes :

If the VCR has not accepted download data from the TV,

you may need to select the Download option from the

VCR’s menu system.

Refer to the VCR operating instruction book.
If Q

Link is not operating correctly, check the following :

The Scart cable is connected to the TV’s AV2 Scart

socket.

The Scart cable is connected to the VCR’s compatible (Q

Link,

NEXTVIEWLINK

or similar technology) Scart socket.

The Scart cable is a “fully wired” type.

For further information on Q

Link and connecting equipment, see pages 36, 43 and 44.

Owner ID

As an added feature, this TV has the option of adding a security code (Owner ID) and personal details into its memory,

so that in the unfortunate event of theft it will help the Police to trace the owner.

Enter required 4 digit Owner ID

PIN NUMBER

(using 0 to 9 on the remote control).

QUICK START GUIDE

Содержание TX-28DTS3

















































Результаты поиска

Содержание TX-28DTS3

Отзывы:

Похожие инструкции для TX-28DTS3

Бренды по названию

Популярные бренды

Panasonic TX-28DTS3, Руководство по эксплуатации

Результаты поиска

Содержание TX-28DTS3

Отзывы:

Похожие инструкции для TX-28DTS3

Бренды по названию

Популярные бренды