28
Access the module
If no module is inserted the
message “No Module Inserted!”
will be displayed. (If you have
inserted a module, check that it is
fully inserted.)
The features that now appear on
screen are dependent on the
contents of the selected Common
Interface Module.
Refer to the instructions supplied
with the card or contact the vendor.
In all cases, it is possible to
navigate the pages using buttons
on the remote control, but because
the commands available must
apply to all manufacturers of DTT
equipment, some on---screen
commands may not correspond
exactly to the remote control
buttons. For example:
For the on---screen command
‘
select
’ or ‘
go
’, use the
OK
button.
If you see the
A " B Y
symbols,
use the cursor keys.
If you see a line of key words
displayed in red, green, yellow and
blue, use the coloured
multifunction buttons to operate
the functions.
The
back up
button should always
allow you to exit the CI software.
COMMON INTERFACE MODULE MENU
