Panasonic TX-28DTS3 страница 40 Скачать руководство пользователя

Страница: 40 / 48

Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting

Teletext. If a DTT station is not transmitting teletext, but you press the

text

button, press the

back up

text

button to clear.

Pressing the

button whilst in Teletext operation will display special function options at the bottom of the screen.

When in Teletext mode, the volume may still be altered to the desired listening level.

What is LIST mode ?

In LIST mode, fourdifferently coloured page numbersare situated atthe bottom of the screen. Eachof thesenumberscanbe alteredand

stored in the TV’s memory.

What is FASTEXT?

In FASTEXT mode, four differently coloured subjects are situated at the bottom of the display. To access more information about one of

these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.

Press the

text

button.

The screen will display the Teletext page.

Press again when you wish to return to TV mode.

Note

: If you press the

text

button while viewing a DTT station that is not transmitting

teletext, press the

back up

button to return to normal viewing.

TV / Teletext mode

Pages can be selected in two ways :

a. Press the Up / Down buttons to increase or decrease the page number by one.

b. By entering the page number, using 0 - 9 on the remote control.

Page Selection

Press the

button to display special functions, followed by the

Green

button.

Press the

Green

button again to expand the BOTTOM half.

Press again to return to normal (FULL) size.

Full / Top / Bottom

Press the

button to display special functions, followed by the

Red

button to

reveal hidden words e.g. quiz page answers. Press again to hide.

Reveal

In FASTEXT mode these correspond to the differently coloured subjects.

In LIST mode they correspond to the differently coloured page numbers.

Red / Green / Yellow / Blue buttons

In LIST mode the four page numbers can be altered (only for analogue stations stored

on programme positions 1 - 25).

To do this, press one of the four coloured buttons and enter the new page number.

Press and hold

, the page numbers will change to white indicating that the page is

stored.

List Store

Hold

To hold the Teletext page when viewing multi

page information.

Press again to return to automatic page update.

HOLD

TELETEXT OPERATION

Содержание TX-28DTS3

















































Результаты поиска

Содержание TX-28DTS3

Отзывы:

Похожие инструкции для TX-28DTS3

Бренды по названию

Популярные бренды

Panasonic TX-28DTS3, Руководство по эксплуатации

Результаты поиска

Содержание TX-28DTS3

Отзывы:

Похожие инструкции для TX-28DTS3

Бренды по названию

Популярные бренды