26
B
Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is
transmitting Teletext.
B
Pressing the Picture button whilst in Teletext mode will display the Brightness function with a white bar. Press
to alter
the setting as required.
Pressing the Setpu button whilst in Teletext operation will display special function options at the bottom of the screen.
B
When in Teletext mode, the volume may still be altered to the desired listening level.
What is LIST mode?
In LIST mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers can be
altered and stored in the receiver’s memory.
What is FLOF?
In FLOF mode, four differently coloured subjects are situated at the bottom of the display. To access more information about
one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects
shown.
TELETEXT OPERATION
Hold
To hold the Teletext page when viewing multi-page information.
Press again to return to automatic page update.
TV/Teletext mode
Press the TV/TEXT button.
The screen will display the Teletext page.
Press again when you wish to return to TV mode.
Page selection
Pages can be selected in two ways:
a. Press the Up/Down buttons to increase or decrease the page number by one.
b. By entering the page number, using 0 - 9 on the remote control.
Full/Top/Bottom
Press the SET UP button to display special functions, followed by the Green button.
Press the Green button again to expand the BOTTOM half.
Press again to return to normal (FULL) size.
Reveal
Press the SET UP button to display special functions, followed by the Red button to reveal
hidden words e.g. quiz page answers. Press again to hide.
Red/Green/Yellow/Blue buttons
In FLOF mode these correspond to the differently coloured subjects.
In LIST mode they correspond to the differently coloured page numbers.
List Store
In LIST mode the four page numbers can be altered (programme positions 1 - 25 only).
To do this, press one of the four coloured buttons and enter the new page number.
Press and hold STR, the page numbers will change to white indicating that the page is
stored.
