Panasonic Toughbook CF-W4GWCZZBM, Руководство по эксплуатации

Страница: 61 / 68

61
Impo
rtan
t Information
Set the Product Recovery DVD-ROM, and execute step
D
.
D
Press the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The Setup Utility will close, and the computer will restart.
If [Enter Password] is displayed during the following procedure, enter the
Supervisor Password or User Password.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled...] appears,
press the
Y
key.
E
When the message "Select a number" is displayed, press the
2
key and
perform [2. [Erase HDD]].
(You can cancel this operation by pressing the
0
key.)
The confirmation message will be displayed.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled...] appears,
press the
Y
key.
When the message [Computer must be rebooted in order to execute
[Erase HDD]] appears, press the
R
key.
F
Press the
Y
key.
Hard Disk Data Erase Utility will start.
G
When [<<<Start menu>>>] is displayed, press the
Enter
key.
H
The approximate time required for erasing data will be displayed.
Press the
Space
key.
I
At the confirmation message, press the
Enter
key.
The operation of erasing the hard disk starts.
z If necessary, the “hard disk data erase” operation can be cancelled
after it has begun by pressing the
Ctrl
+
C
key.
If the operation is cancelled before being completed, a part of data will
not be erased.
J
The message "Hard disk data has been deleted" will be displayed.
Remove the Product Recovery DVD-ROM, and press any key to shut
down the computer.
z
If a problem occurred during the operation, an error message will be
displayed.