background image

17

Preparations

4

Open the display.

A

Press and hold the latch (B) located at the front.

B

Lift open the display.

z

Do not open the display wider than necessary (140

°

 or more), and do 

not apply excessive pressure to the LCD. Do not open or close the 
computer holding the edge of the LCD segment.  Hold the C (below) 
segment to open or close the computer.

5

Connect your computer to a power outlet. 

z

Be sure the AC adaptor is connected until completing the first-time use 
operation.

z

The battery pack will be charged automatically.
Charging Time: Approx. 5 hours (Power off), Approx. 6.5 hours (Power on) 
(Varies depending on the usage conditions.)

z

When using the computer for the first time, do not connect any peripheral 
device except the battery pack and AC adaptor to the computer.

CAUTION

Handling the AC adaptor

z

Do not subject the AC adaptor to any strong impact.
Using the AC adaptor after a strong impact such as being dropped may result in 
electrocution, short circuit, or fire. 

z

Use only the specified AC adaptor with your computer.  Using an AC adaptor 
other than the one supplied might damage the battery and/or the computer.

z

Problems such as sudden voltage drops may arise during periods of thunder 
and lightning.  Since this could adversely affect your computer, an uninterrupt-
ible power source (UPS) is highly recommended unless running from the battery 
pack alone.

6

Turn your computer on.

z

Slide the power switch 

 and hold it for approximately one second until 

the power indicator 

 turns on before releasing it.

CAUTION

z

Do not slide the power switch and hold it for more than four seconds; this will 
cause the power to be turned off forcibly.

z

Do not slide the power switch repeatedly.

z

Do not press any keys or touch the touch pad, until [Windows XP Professional 
Setup] is displayed.

z

Do not change the Setup Utility until completing step 

7

. If you do so, Windows 

setup may not operate properly.

Содержание Toughbook CF-W4GWCZZBM





































































Отзывы: