56
Barcode Configuration Utility
Using the Barcode Configuration Utility, you can create and perform the configuration files to set up the settings for Barcode
module and Barcode Key Emulator.
By using with the 1D/2D Barcode Setting Utility, you can operate the Barcode Configuration Utility.
Two Utilities have been prepared to set the Barcode Reader operations.
z
Barcode Configuration Utility
Create the configuration file to set the Barcode Reader operations.
z
Barcode Setting Utility
This is necessary to set the Barcode Reader operations according to the configuration file.
If these Utilities are not installed or deleted, install them according to the following procedures.
Installing Barcode Configuration Utility
1
Log on to Windows as an Administrator.
2
Input [c:\util\bcr_cfg\setup.exe] in [start] - [Run] and click [OK].
3
Follow the on-screen instructions.
Installing Barcode Setting Utility
1
Log on to Windows as an Administrator
2
<For model with 1D Barcode Reader>
Input [c:\util\bcr1_set\setup.exe] in [start] - [Run] and click [OK].
<For model with 2D Barcode Reader>
Input [c:\util\bcr2_set\setup.exe] in [start] - [Run] and click [OK].
3
Follow the on-screen instructions.
You do not have to restart the computer.
Installing the Utility
