22
Standby and Hibernation Functions
C
Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced], and add a check
mark in [Prompt for password when computer resumes from standby].
z
Do not enter standby or hibernation in the conditions below, otherwise the data or file may be corrupted, standby or hiber-
nation may not work, or malfunction may occur in the computer or the peripheral devices.
• When any of the flash memory drive indicator
and the SD Memory Card indicator is on.
• When playing/recording audio files or displaying motion video such as MPEG files.
• When using communication software or network functions.
• When using peripheral devices.
(If peripheral devices fail to work normally, restart the computer.)
To enter standby or hibernation
1
Press the power switch (A) until a beep
sounds.
Standby: The power indicator (B) blinks green.
Hibernation: The power indicator (B) goes off.
z
There are another 2 ways to enter Standby/Hibernation.
•
Fn
+
T
(
) (Standby) /
Fn
+
G
(
) (Hibernation)
• To enter standby, click [start] - [Turn Off Computer] - [Stand By]. To enter
hibernation, click [start] - [Turn Off Computer], then press and hold
(Shift)
and click [Hibernate].
*1
If the speakers are muted, beeps do not sound.
*2
For Numeric keyboard model :
Fn
+
6
(
) (Standby) /
Fn
+
0
(
) (Hibernation)
*3
For Numeric keyboard model, use a USB keyboard.
CAUTION
z
At the beep
, immediately release the power switch. If you press and hold the power switch for longer than 4 seconds,
the computer will forcibly shut down and unsaved data will be lost even if you have set [Shut down] in [When I press
the power button on my computer] (
“Setting Standby or Hibernation”).
*4
If the speakers are muted, beeps do not sound.
z
While the computer is entering standby or hibernation, do not touch the computer.
For example, do not:
• Touch the keyboard, touchscreen or power switch.
• Use an external mouse or other peripheral devices.
Entering/Resuming from Standby or Hibernation
A
B