14
Getting Started
First-time Operation
The battery charging starts automatically.
CAUTION
z
Do not disconnect the AC adaptor and do not switch the wireless switch to
on until the first-time operation procedure is completed.
z
When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor.
z
Handling the AC adaptor
• Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterrupt-
ible power source (UPS) is highly recommended unless running from the bat-
tery pack alone.
Slide and hold the power switch
for approximately one second until the
power indicator
lights.
z
When the power is turned on, the power indicator lights. But, in the following cases,
the power indicator may turn off once immediately after the power is turned on.
• After removing the battery pack and the AC adaptor and setting them again
• After sliding the power switch for four seconds or longer and turning off the power
CAUTION
z
Do not slide the power switch repeatedly.
z
The computer will forcibly be turned off if you slide and hold the power switch for
four seconds or longer.
z
Once you turn off the computer, wait for ten seconds or more before you turn on
the computer again.
z
Do not perform the following operation until the hard disk drive indicator
turns off.
• Connecting or disconnecting the AC adaptor
• Sliding the power switch
• Touching the keyboard, touch pad or touchscreen
• Closing the display
z
Do not change the Setup Utility until completing step
5
. If you do so, Windows
setup may not operate properly.
<Only for model with Windows XP Tablet PC Edition>
z
The input panel is displayed on “Welcome to the Windows XP Setup Wizard”.
Move “Welcome to the Windows XP Setup Wizard” and make sure that the “Wel-
come to the Windows XP Setup Wizard” and the input panel do not overlap.
Follow the on-screen instructions.
z
After the computer is turned on, the screen remains black or unchanged for a
while, but this is not a malfunction. Wait for a moment until the Windows
setup screen appears.
z
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
z
“Join a wireless network” screen may not appear.
You can set the Wireless Network after the setup of Windows is complete.
CAUTION
z
Do not turn off the computer until completing the first-time operation procedure.
z
You cannot choose the following words for user name and password: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
z
Do not use an “@” mark for user name. If you create a user name that includes
an “@” mark, a password will be requested at the log-on screen, even if no pass-
word has been set. If you try to log on without entering a password, “The user
name or password is incorrect.” is displayed and you will not be able to log on to
Windows (
Î
page 26).
3
Connect your computer to a power outlet.
4
Turn on the computer.
5
Setup Windows.
3
4
DFQW5372ZA_CF-T8mk4_7XP_OI_EN.book 14 ページ ２０１０年１月２２日 金曜日 午後５時１２分
Содержание Toughbook CF-T8EWATZJM
Страница 38: ...38 MEMO...
Страница 39: ...39...
