background image

6

Getting S

tarted

Read Me First

Precautions

Avoid Extreme Heat and Cold

Do not store or use the computer in locations
exposed to heat, direct sunlight, or extreme cold.
Avoid moving the computer between locations with
large temperature difference.
Operation: 5 

o

C to 35 

o

C {41 

o

F to 95 

o

F}

Storage:

-20 

o

C to 60 

o

C {-4 

o

F to 140 

o

F}

Avoid Direct Sunlight on the LCD Panel

The LCD panel should not be exposed to direct
sunlight or ultraviolet light.

Avoid Humidity, Liquids and Dust

Do not store or use the computer in locations ex-
posed to high humidity, liquids (including rain) or
dust.

Prevent Shock

Avoid subjecting the computer to severe vibrations
or impact.  Do not place the computer inside a car
trunk.

Avoid Radio Frequency Interference

Do not place the computer near a television or ra-
dio receiver.

Avoiding Low-temperature Burns

Avoid more than casual contact with any heat pro-
ducing area of  the notebook computer, AC adap-
tor, and any option or accessory you use with it.
Even low heat, if warmer than body temperature,
can cause a burn, if the skin is exposed to the heat
source for a long period of time.

Do not touch the computer and cable when it
starts thundering

Keep SD memory cards and MultiMedia Cards
(both sold separately) away from infants and
small children

Accidental swallowing will result in bodily injury.
In the event of accidental swallowing, see a doctor
immediately.

Do not connect a telephone line, or a network cable
other than the one specified, into the LAN port

If the LAN port is connected to a network such as the
ones listed below, a fire or electric shock may result.
• Networks other than 100BASE-TX or 10BASE-T
• Phone lines (Telephone lines, internal phone lines

(on-premise switches), digital public phones, etc.).

 Usage

 Handling

Avoid Magnetic Fields

Keep the computer away from magnets.
Data stored on the hard disk may be lost.

Avoid Stacking

Do not place heavy objects on top of the computer.

Keep Small Objects Away

Do not insert paper clips or other small objects into
the computer.

Do Not Disassemble the Computer

Do not attempt to disassemble your computer.

Avoid Excessive Force on the Display

Do not apply excessive downward force on the
display.

Содержание Toughbook CF-T2FWATZBM

















































Отзывы: