Panasonic Toughbook CF-T2FWATZBM, Руководство по эксплуатации

Страница: 35 / 48

35
Troubleshooting
11
Remove the recovery CD and press any key to shut
down the computer, then remove the DVD-ROM &
CD-R/RW drive.
12
Turn on the computer, and press F2 while [Pana-
sonic] boot screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Pass-
word.
13
Press F9 .
At the confirmation message, select [Yes] and press
Enter . (The Setup Utility settings will return to their
default values. Even the security settings with the excep-
tion of the password(s) will return to their default values.)
14
Press F10 .
At the confirmation message, select [Yes] and press
Enter .
15
Perform the setup procedure for Windows by following the
instructions on the screen (
page 13 -14).
16
Run the Setup Utility and c
hange the settings where nec-
essary.
17
If you can connect to the Internet, perform Windows Up-
date.
Do not interrupt the reinstallation procedure before
completion, for example by turning off the computer
or pressing
Ctrl
+
Alt
+
Del
, as this may
prevent Windows from starting up, or may cause data
to be lost so that the reinstallation procedure cannot
be executed.
When a message appears instructing you to insert
the next CD, insert the recovery CD showing the
next number in the sequence, and then select [OK].
If the message [The media does not contain the cor-
rect file] appears, select [OK]. A message will ap-
pear instructing you to insert the next CD.
Confirm that the proper recovery CD has been inserted
by opening the cover of the DVD-ROM & CD-R/RW
drive and then close the cover, then select [OK].
CAUTION
After the reinstallation procedure completes, this screen
should appear.
-----------------------------------------------------------------------
[Recovery] is complete.
Windows(R) XP Professional install wizard will start after reboot.
Please remove the Product Recovery CD-ROM.
After turning off the power, disconnect the CD/DVD-ROM drive, and turn the
power on again.
-----------------------------------------------------------------------
10
At the confirmation message, press
Y
.
The operation of reinstallation for the hard disk starts auto-
matically. (The operations take about an hour.)