Panasonic Toughbook CF-47 Series, Руководство по эксплуатации

Страница: 12 / 32

12
Getting Started
This concludes the first-time use operation guidelines.
CAUTION
Create floppy disks
Prepare 2HD floppy disks and make sure they are not in the write-protected state, then
select [Start] - [Programs] - [Panasonic] - [Create BACKUP DISK] and follow the on-
screen instructions. Place a label identifying the contents on each disk.
Name of created backup disk
FIRSTAID FD
(When the display for creating the UPDATE FD is shown, create the disk by following the on-screen
instructions.)
Store the floppy disks in a safe place. They will enable you to return your computer
to close to the condition at the time of purchase should any problems occur.
When creating floppy disks, do not run any other application program.
When creating floppy disks and the message [Insufficient files to copy] is displayed,
click [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk, power
down your computer or use the suspend or hibernation function (
"Sus-
pend/Hibernation Functions").
NOTE
1
2
3
5
4
9
\tsclient
\tools
To uncompress the file, it is necessary to have approximately 150 MB ( )
/80 MB ( ) of free disk space available on the hard disk.
To use the CD-ROM drive in MS-DOS mode, perform the operation below after modi-
fying config.sys and autoexec.bat (
"CD-ROM drive").
File decompression method:
Turn your computer on.
When using the files in the following folders available on the retail version of the
Windows CD-ROM, it is necessary to run a separate file decompression program.
Windows 98
\admin
\datalink
\drivers
\help
\other
Windows 95
When [Starting Windows 95] is dis-
played, press
F8 .
Windows 95 Windows 98
Select [Command prompt only].
Insert the Product Recovery CD-ROM.
At the prompt, input the following:
L:\en\addfile
Enter
Follow the message on the screen.
2
When [Press <F2> to enter SETUP]
is displayed, immediately press
Ctrl (until the menu is displayed).
After this program is executed, the con-
tents of the above folders will be decom-
pressed to the c:\util\win95add folder.
Windows 95 Windows 98
After this program is executed, the con-
tents of the above folders will be decom-
pressed to the c:\util \win98add folder.
Windows 98
Windows 95
First-time Operation