33
Security Measures
NOTE
z
When the Supervisor Password has not been set, the User Password cannot be set.
Set the Supervisor Password if you have not done so. (
)
z
To disable the User Password, start up the Setup Utility with the Supervisor Password.
1
Run the Setup Utility. (
2
Using either
Î
or
Í
, select [Security].
3
Using either
Ï
or
Ð
, select [Set User Password] and press
Enter
.
4
Only when the User Password has been set:
Enter your password at [Enter Current Password] and press
Enter
.
5
Enter your password at [Enter New Password] and press
Enter
.
z
To disable the User Password
Press only
Enter
.
6
Re-enter your password at [Confirm New Password] and press
Enter
.
z
To disable the User Password
Press only
Enter
.
7
At [Setup Notice], press
Enter
.
8
Press
F10
and select [Yes], then press
Enter
.
CAUTION
z
Do not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, ask a person who knows the Supervisor Password.
z
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
Setting the User Password (enabling, changing, disabling)
