Setting Up the TV
5
Attaching the pedestal
1
Assemble the pedestal
32” model
Front
39” & 50” models
Front
2
Attach the TV to the pedestal
32” model
39” & 50” models
Preventing the TV from falling over
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
●
This information is designed to reduce the risk of
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
Screw
Wood
screw
Band
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the TV.
1
Remove the assembly screws
from the TV.
2
Pull out the pedestal from the TV.
3
Remove the assembly screws
from the bracket.
Inserting remote’s batteries
Note the correct
polarity (+ or -)
Press the hook and
lift the cover
Wall mounting the TV (optional)
Choosing to wall mount the TV shall be done at the
owner’s risk and expense. Always use a qualified
installer to perform a TV wall bracket installation.
Incorrect installation may cause TV to fall, resulting in
personal injury and product damage that is not covered
by warranty.
b
Rear of the TV
Screw for fixing the TV onto the
wall-hanging bracket (not supplied)
Depth of
screw
(View from the side)
a
■
Holes for wall-hanging bracket installation
Models
a
b
TH-L32B6A/Z
200 mm
100 mm
TH-L39B6A/Z
200 mm
200 mm
TH-L50B6A/Z
400 mm
400 mm
B6AZ.indd 5
B6AZ.indd 5
2/1/2013 3:51:03 PM
2/1/2013 3:51:03 PM
