Panasonic TH-EBP42F страница 5 Скачать руководство пользователя | Manualshive

Страница: 5 / 48

background image

5

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC CAUTION:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modi

fi

cations to this monitor not expressly

approved by Panasonic Corporation of North America could cause harmful interference and would void the
user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TH-37PWD8UK, TH-42PWD8UK, TH-37PHD8UK, TH-42PHD8UK, TH-50PHD8UK

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Contact Source:

Panasonic Consumer Electronics Company

1-888-843-9788

email:

[email protected]

CANADIAN NOTICE:

This Class B digital apparatus complies with Canadian ICES-003.

Note:

Do not allow a still picture to be displayed for an extended period, as this can cause permanent after-image to
remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in NORMAL mode.

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.
• Macintosh is a registered trademark of Apple Computer, USA.
• S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully

respected.

FCC STATEMENT

«
...
3
4
5
6
7
...
»

Содержание TH-EBP42F

















































Отзывы:

Нет отзывов

Похожие инструкции для TH-EBP42F

Бренд: IEI Technology Страницы: 134

3D DLP WD-73C11

Бренд: Mitsubishi Страницы: 46

CP6207 0020 Series

Бренд: Beckhoff Страницы: 25

IDP31-156W Series

Бренд: Advantech Страницы: 32

AMB-2003 Series

Бренд: Aaeon Страницы: 109

Бренд: Sanyo Страницы: 2

Бренд: Sanyo Страницы: 2

Бренд: Sanyo Страницы: 2

Бренд: Sanyo Страницы: 52

Бренд: Sanyo Страницы: 50

DP50710 - 50" Diagonal Plasma 720p HDTV

Бренд: Sanyo Страницы: 60

BRAVIA KDL-46XBR5

Бренд: Sony Страницы: 2

BRAVIA KDL-46XBR4

Бренд: Sony Страницы: 2

BRAVIA KDL-46XBR3

Бренд: Sony Страницы: 2

Bravia KDL-47W802A

Бренд: Sony Страницы: 5

BRAVIA KDL-46VL150

Бренд: Sony Страницы: 2

BRAVIA KDL-46VL150

Бренд: Sony Страницы: 2

BRAVIA KDL-46V3000

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды