51
English
HDMI 4K Interface
Sets the combination of input for HDMI 1 to HDMI 2
terminals in 4K resolution images.
[Single [HDMI1,HDMI2]]:
4K input with 1 terminal via HDMI 1 or HDMI 2
[Dual [HDMI1&HDMI2]]:
4K input with 2 terminals via HDMI 1 and HDMI 2
Note
●
Input combination in 4K resolution images (see page
16)
Display orientation
Sets the on-screen display orientation in the portrait
setting.
[Landscape]:
Cooling fan control will be set for horizontal
installation.
[Portrait]:
Cooling fan control will be set for vertical
installation.
The on-screen display rotates anticlockwise by 90
degrees for easy view in the portrait setting.
Power Indicator
Landscape
Portrait
Note
●
In the portrait setting, the power indicator shall come
to the downside.
●
Make sure to set to [Landscape] when installing
horizontally, and set to [Portrait] when installing
vertically.
Failure to do so may shorten the life of the internal
parts and result in malfunctions.
High altitude mode
Change settings when using the unit at high altitudes.
[Off]:
Cooling fan control will be set to use the unit
where it is below 1 400 m (4 593 ft) above
sea level
[On]:
Cooling fan control will be set to use the unit
at high altitudes (1 400 m (4 593 ft) and higher
and below 2 400 m (7 874 ft) above sea level)
Note
●
When using the unit where it is 1 400 m (4 593 ft) and
higher and below 2 400 m (7 874 ft) above sea level,
make sure to set to [On].
Failure to do so may shorten the life of the internal
parts and result in malfunctions.
No activity power off
When this function is set to [Enable], the power is turned
off (standby) automatically when there is no operation of
the Display for 4 hours.
Starting from 3 minutes before the turn off, the
remaining time will be displayed.
No activity power off
Press any key to abort.
3 min
When the power is turned off due to this function, a
message [Last turn off due to ‘No activity power off’.] is
displayed next time the power is turned on.
Note
●
During the screensaver is running, this function is
disabled.
Menu display duration / OSD
brightness / OSD position
Set the display time, brightness and the position of the
on-screen menu display.
[Menu display duration]:
[5 sec] - [180 sec]
[OSD brightness]:
[1] - [5]
[OSD position]:
[Right], [Left]
(Display installation:
Horizontal)
[Upper], [Lower]
(Display installation:
Vertical)
