manualshive.com logo in svg

Panasonic TH-84LQ70LU, Руководство по эксплуатации

Поделиться
Скачать
Panasonic TH-84LQ70LU Скачать руководство пользователя страница 61

61

English

 Serial ID function

 Set to control external control with the PC connected to 
SERIAL terminal according to  the Display’s ID number 
(Panel ID).

 [Off]:

 Disables external control by the ID.

 [On]:

 Enables the external control by the ID.

 LAN control protocol

 Select the LAN control protocol.

 [Protocol 1]:

 Control with the Panasonic Display 
sequence.

 [Protocol 2]:

 Control with the sequence that 
compatible with Panasonic Projector.

 Note

● 

 When using “Early Warning Software” (see page 67), 
set to [Protocol 2].

  RS-232C/LAN information timing

 Set up the informing manner for no signal or 
temperature rising.

 During RS-232C controls:

 Warning or error message sent on the display 
automatically.

 During LAN controls:

 Acquire the warning or error message from the 
display.

 1

 Select the item with    .
 Select the set point with    .

 

 RS-232C/LAN information timing

 No signal warning

 No signal warning timing

 Temperature warning

 No signal error
 No signal error timing

 On

 5min

 On

 10min

 On

 [No signal warning]

 When set to [On], the display sends out the no signal 
warning.

 [No signal warning timing]

 Set up the detecting time for no signal warning.
 (Range: 01 - 60, Interval: 1 minute)

 [No signal error]

 When set to [On], the display sends out the no signal 
error.

 [No signal error timing]

 Set up the detecting time for no signal error.
 (Range: 01 - 90, Interval: 1 minute)

● 

 The warning of [No signal warning] and the error of 
[No signal error] are not sent when the no signal state 
is detected through any of the following functions: 

 [No signal power off], [PC power management], 
[DVI-D power management], [HDMI1 power 
management] - [HDMI4 power management] (see 
page 47)

● 

 If there is no signal when [PC IN] is input, [PC power 
management] is activated first and the Display enters 
the standby mode.

 Setting Example:

 [No signal warning timing]: 5 minutes
 [No signal error timing]: 10 minutes
 [PC power management]: [On] (60 seconds)

 Note

● 

 The [No signal error timing] cannot be set shorter 
than [No signal warning timing].

 [Temperature warning]

 When set to [On], the display sends out the 
warning temperature.

 

Содержание TH-84LQ70LU






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды