English
28
Selecting the input signal
Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
Unit
INPUT
MENU
VOL
ENTER/
+
/
-
/
Switches input every time the buttons are pressed.
●
Or, press <INPUT>, select the input with and
press <ENTER> to set.
1
2
3
4
5
6
7
8
9
HDMI1
HDMI2
HDMI3
HDMI4
DisplayPort
DIGITAL LINK
DVI-D
PC
SDI1
SDI2
SDI3
SDI4
INPUT
1
Input in HDMI 1 terminal (Supports 4K picture)
*
2
Input in HDMI 2 terminal (Supports 4K picture)
*
3
Input in HDMI 3 terminal
*
4
Input in HDMI 4 terminal
*
5
Input in DisplayPort terminal (Supports 4K picture)
6
Input in DIGITAL LINK terminal (Supports 4K picture)
7
Input in DVI-D IN terminal
8
Input in PC IN terminal
9
Displayed when the optional “3G-SDI Terminal Board
with Audio” (TY-TBN03G) is connected.
*
: During 4K picture input, [HDMI1] - [HDMI4] may be
displayed differently depending on the settings of
[Setup] - [HDMI 4K Interface]. (see page 52)
Note
●
Displays the signal name as set in [Input label]. (see
page 49)
●
Outputs the sound as set in [Audio input select] in the
[Options] menu. (see page 58)
●
Input will not be switched unless [Input lock] is set to
[Off]. (see page 59)
●
Image retention (image lag) may occur on the LCD
display panel when a still picture is kept on the panel
for an extended period. To prevent such a problem,
using the screensaver is recommended. (see page
46)
RECALL
It is possible to check the setting status of input label,
picture mode, etc.
Press <RECALL>.
Current setting status will be displayed.
16:9
Off timer
90 min
Memory name: MEMORY2
1
Input label
2
Aspect mode (see page 30)
3
Audio input (see page 58)
4
Profile name (see page 41)
5
Off timer remaining time (see page 29)
6
Clock / Mute (see page 29)
●
When there is no signal to the selected input, [No
Signal] is displayed for about 30 seconds at the end.
●
To display the clock, set [Time], and then set [Clock
display] to [On]. (see page 51, 62)
●
You can set its position to be displayed with [Setup] -
[OSD position]. (see page 52)
