Panasonic TH-65EF1E Скачать руководство пользователя

Страница: 98 / 98

Notice (U.S.A. only)
Disposal may be regulated in your community due to environmental considerations. For disposal or

recycling information, please visit Panasonic website:

http://www.panasonic.com/environmental

or call 1-888-769-0149.

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note this serial

number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of

your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number

Serial Number

For TH-65EF1U
Panasonic System Communications Company of North America

Unit of Panasonic Corporation of North America

Executive Office :

Two Riverfront Plaza, Newark, New Jersey 07102-5490

Panasonic Canada Inc.

5770 Ambler Drive
Mississauga, Ontario
L4W 2T3

For TH-65EF1E

Panasonic Testing Centre
Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany

Web Site: http://panasonic.com

English

TP0217TS0 -PB

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take

them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any

potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with

the requirement set by the Directive for the chemical involved.

Information on Disposal in other Countries outside the European Union

These symbols are only valid in the European Union.

If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of

disposal.

Содержание TH-65EF1E



































































































Результаты поиска

Содержание TH-65EF1E

Отзывы:

Похожие инструкции для TH-65EF1E

Бренды по названию

Популярные бренды

Panasonic TH-65EF1E, Инструкция по эксплуатации (Функциональное руководство)

Результаты поиска

Содержание TH-65EF1E

Отзывы:

Похожие инструкции для TH-65EF1E

Бренды по названию

Популярные бренды