English
8
Safety Precautions
WARNING
■
Setup
Optional accessory
•
Early Warning Software
ET-SWA100 series
*
*
: Suffix of the part number may differ depending on the
license type.
Note
●
The part number of the optional accessories are
subject to change without notice.
Small parts can present choking hazard if accidentally
swallowed. Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
Do not place the Display on sloped or unstable
surfaces, and ensure that the Display does not hang
over the edge of the base.
•
The Display may fall off or tip over.
Install this unit at a location with minimal vibration
and which can support the weight of the unit.
•
Dropping or falling of the unit may cause injury or
malfunction.
Do not place any objects on top of the Display.
•
If foreign objects or water get inside the Display, a
short-circuit may occur which could result in fire or
electric shock. If any foreign objects get inside the
Display, please consult your local Panasonic dealer.
Transport only in upright position!
•
Transporting the unit with its liquid crystal panel
facing upright or downward may cause damage to the
internal circuitry.
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, table cloths and curtains.
For sufficient ventilation, see page 11.
Caution - For use only with UL Listed Wall Mount
Bracket with minimum weight/load 24.0 (52.0 lbs).
When installing the Display vertically;
When installing the Display vertically, be sure that
the Power Indicator comes to the downside. Heat is
generated and it may cause fire or damage to the
Display.
Power indicator
Cautions for Wall Installation
•
The installation should be performed by an installation
professional. Installing the Display incorrectly may
lead to an accident that results in death or serious
injury.
•
When installing on a wall, a wall hanging bracket that
conforms to VESA standards must be used.
65-inch model
: VESA 400 × 400
(see page 11)
•
Before installation, be sure to check if the mounting
location has enough strength to support the weight
of the LCD display and the wall hanging bracket for
anti drop.
•
If you terminate the use of the Display on the Wall,
ask a professional to remove the Display as soon as
possible.
•
When mounting the Display on the wall, prevent the
mounting screws and power cable from contacting
metal objects inside the wall. An electric shock may
occur if they contact metal objects inside the wall.
Do not place the display where it may be affected by
salt or corrosive gas.
•
Doing so may cause the display to fall due to
corrosion. Also, the unit may malfunction.
Do not install the product to a place where the
product is exposed to direct sunlight.
•
If the screen is exposed to direct sunlight, the liquid
crystal panel may have adverse effect.
■
When using the LCD Display
The Display is designed to operate on 110 - 127 or
220 - 240 V AC, 50/60 Hz.
Do not cover the ventilation holes.
•
Doing so may cause the Display to overheat, which
can cause fire or damage to the Display.
Do not stick any foreign objects into the Display.
•
Do not insert any metal or flammable objects into the
ventilations holes or drop them onto the Display, as
doing so can cause fire or electric shock.
