Panasonic TH-65EF1E Скачать руководство пользователя

Страница: 60 / 98

English

■

To set [Button lock]

Set with the buttons on the unit.

[Off]:

   Press  <+ (Unit)> for 4 times.
   Press  <INPUT (Unit)> for 4 times.
   Press  <- (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

[On]:

   Press  <- (Unit)> for 4 times.
   Press  <ENTER (Unit)> for 4 times.
   Press  <+ (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

[MENU & ENTER]:

   Press  <ENTER (Unit)> for 4 times.
   Press  <+ (Unit)> for 4 times.
   Press  <INPUT (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

Note

●

About how to reset the settings to defaults:

“Initialization” (see page 63)

Controller user level

Limits operation of the buttons on the remote control.

[Off]:

You can use all of the buttons on the remote control.

[User1]:

You can only use <Standby (ON/OFF) button>,

<INPUT>, <RECALL>, <MUTE>, <VOL +> and

<VOL -> buttons on the remote control.

[User2]:

You can only use <Standby (ON/OFF) button> on

the remote control.

[User3]:

Locks all the buttons on the remote control.

Note

●

About how to reset the settings to defaults:

“Initialization” (see page 63)

PC auto setting

Sets the operational mode of the automatic position

adjustment in the [Position] menu.

[Off]:

Automatic position adjustment starts when <AUTO

SETUP> is pressed on the remote control or

automatic position adjustment is executed from the

[Position] menu.

[On]:

Other than remote control or menu operation,

automatic position adjustment starts:

•

When the display power is turned ON.

•

When the input signal is switched.

Off-timer function

Enables / disables Off timer function.

[Enable]:

Enables the [Off-timer function].

[Disable]:

Disables the [Off-timer function].

Note

●

When [Disable] is set, the Off-timer is cancelled.

Initial startup

Sets the power mode of the unit for when the power

recovers from failure or after plugging off and in again.

[Last memory]:

Power returns in as the same state as before the

power interruption.

[On]:

Power returns in power On.
(Power Indicator: green)

[Standby]:

Power returns in standby mode.
(Power Indicator: red/orange)

Note

●

When using multiple displays, [Standby] is preferred

to be set in order to reduce a power load.

Display ID

Sets ID number when controlling the Display with

[Controller ID function] and [Serial ID function].

0 ‒ 100 (Standard value: 0)

Содержание TH-65EF1E



































































































Результаты поиска

Содержание TH-65EF1E

Отзывы:

Похожие инструкции для TH-65EF1E

Бренды по названию

Популярные бренды

Panasonic TH-65EF1E, Инструкция по эксплуатации (Функциональное руководство)

Результаты поиска

Содержание TH-65EF1E

Отзывы:

Похожие инструкции для TH-65EF1E

Бренды по названию

Популярные бренды