manualshive.com logo in svg

Panasonic TH-55LFV70U, Руководство по эксплуатации, Страница: 77 / 97

Поделиться
Скачать
Panasonic TH-55LFV70U Скачать руководство пользователя страница 77

77

Using Web Browser Control

4 

Click [Submit].

The settings will be registered.

Note:

• 

Changing the setting of LAN while connected with LAN might disconnect the connection.

Adjust clock page

Click [Detailed set up], then [Adjust clock] to display the Adjust clock page.

1

3

2

1 

 New date field

2 

 New time field

3 

 Button to update time and date settings

Notes:

• 

If the time becomes incorrect immediately after setting the correct time, contact the dealer where you bought the 

Display.

Ping test page

This page makes it possible to check whether the network is connected to the DHCP server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.

1
2

Display which appears when the connection was 

successful.

Display which appears when the connection failed.

1 

 Enter the IP address of the server to be tested.

2 

 Button for conducting the test.

Содержание TH-55LFV70U


































































































Отзывы:

Нет отзывов