Panasonic TH-55LFV70U Скачать руководство пользователя страница 67

Страница: 67 / 97

SETUP

Network Setup

LAN Setup

Detailed network settings for the LAN established via the LAN terminal of the Display or twisted pair cable transmitter

can be configured.

Network settings

DIGITAL LINK mode
Network control

Off

Auto

Off

Display name

LFV70-00

LAN setup

DIGITAL LINK status

Digital Interface Box

AMX D. D.
Crestron Connected

Off
Off

Extron XTP

Reset

LAN setup

Save

DHCP

IP address

169 254

255 255

Subnet mask
Gateway

Port

MAC address

1024

00:00:00:00:00:00

Select “LAN Setup” and press

DHCP, IP address, Subnet mask, and Gateway settings

Set DHCP.

When “Off” is selected, IP address and other settings can be set

manually.

Select the item and press

Enter an address.

92.168. 0. 8

IP ADDRESS

Use

to select a digit.

Use

to change a number.

Press

Pressing

will cancel the address change.

Select “Save” and press

PORT setting

Select “Port” and press

Enter a port number.

1024

PORT

Use

to select a digit.

Use

to change a number.

Press

Pressing

will cancel the port number change.

Save

Save the current network Setup. Each value set for DHCP,

IP address, Subnet mask, and Gateway will be saved. If

“NG” is displayed, check the same IP address is not used

within the same network.

DHCP (DHCP client function)

To obtain an IP address automatically using a DHCP

server, set this to “On”. If DHCP server is not used, set

this to “Off”.

IP address (IP address display and setting)

Enter an IP address if DHCP server is not used.

Subnet mask (Subnet mask display and setting)

Enter a subnet mask if DHCP server is not used.

Gateway (Gateway address display and setting)

Enter a gateway address if DHCP server is not used.

Port

Set the port number used for command control.
The available setting range is 1024 – 65535.
When the PJLink™ protocol is used, the port setting is not

necessary.

MAC Address

Display the MAC address of this unit.

Note:

Shipping condition is below.
[DHCP]: Off
[IP address]: 192.168.0.8
[Subnet mask]: 255.255.255.0

[Gateway]: 192.168.0.1

Notes:

•

To use a DHCP server, make sure the DHCP server is started.

•

Contact your network administrator for details on settings.

Содержание TH-55LFV70U


































































































Результаты поиска

Содержание TH-55LFV70U

Отзывы:

Panasonic TH-55LFV70U, Руководство по эксплуатации, Страница: 67 / 97

Результаты поиска

Содержание TH-55LFV70U

Отзывы: