Panasonic TH-55LFV70U Скачать руководство пользователя страница 16

Страница: 16 / 97

Connections

Basic format for control data

The transmission of control data from the computer

starts with a STX signal, followed by the command, the

parameters, and lastly an ETX signal in that order. If there

are no parameters, then the parameter signal does not

need to be sent.

Start

(02h)

3-character

command (3 bytes)

Colon

Parameter(s) End

(03h)

STX

C1 C2 C3

P1 P2 P3 P4

ETX

Notes:

•

If multiple commands are transmitted, be sure to wait

for the response for the first command to come from this

unit before sending the next command.

• Note that sending a command with ID=”00” does not

return a response.

•

For command transmission, be sure to wait at least 700

msec before sending a next command.

•

If an incorrect command is sent by mistake, this unit will

send an “ER401” command back to the computer.

•

Consult an Authorized Service Center for detail

instructions on command usage.

•

With the power off, this display responds to PON

command only.

•

When the serial ID function (P45) is ON, only

commands including the same display ID can be

operated. Add AD94, RAD=<XXX> to the head of the

format. For <XXX>, put a display ID of 001 to 100, or

000, or put a group ID of AAA (for A) to GGG (for G).

Command

Command Parameter Control details

PON

None

Power ON

POF

None

Power OFF

AVL

***

Volume 000 - 100

AMT

Audio MUTE OFF

Audio MUTE ON

IMS

None

VD1

YP1

HM1

DV1

DV2

PC1

DL1

DP1

UD1

Input select (toggle)

VIDEO IN input (VIDEO)

COMPONENT/RGB IN input

(Component)

HDMI input (HDMI)

DVI-D1 IN input (DVI-D1)

DVI-D2 IN input (DVI-D2)

PC IN input (PC)

DIGITAL LINK input

DisplayPort input
USB input

DAM

None

ZOOM

FULL

NORM

ZOM2

Screen mode select (toggle)

Zoom1

16:9

4:3

Zoom2

IR IN / IR OUT Terminals connection

Use a 3.5 mm stereo mini plug to connect from the IR OUT of the First LCD Display to the IR IN of the Second LCD

Display. The IR signal from the First LCD Display will be sent to the Second LCD Display.

First LCD Display

Second LCD Display

Third LCD Display

* Stereo mini plug (M3)

At this time, IR receiver of the Second LCD Display will not work.
It is possible to daisy-chained by repeating the above connection.

Содержание TH-55LFV70U


































































































Результаты поиска

Содержание TH-55LFV70U

Отзывы:

Panasonic TH-55LFV70U, Руководство по эксплуатации, Страница: 16 / 97

Результаты поиска

Содержание TH-55LFV70U

Отзывы: