Panasonic TH-42PF30W Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 72

background image

<Software Information for This Product>

This product has software installed partially licensed under the Free BSD LICENSE.
Free BSD LICENSE regulations under the above specifications are as follows:
(These regulations are set by the third party; therefore the original (English) regulations are stated.)

Copyright © 1980, 1986, 1993
The Regents of the University of California. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following

disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following

disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products

derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Customer’s Record

The model number and serial number of this product can be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identi cation in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Web Site : http://panasonic.net

¤

Panasonic Corporation 2011

Printed in Thailand

M0711-0

«
...
70
71
72

Содержание TH-42PF30W









































































Отзывы:

Нет отзывов

Похожие инструкции для TH-42PF30W

Бренд: D-Link Страницы: 24

Бренд: Panasonic Страницы: 36

LCD4615 - MultiSync - 46" LCD Flat Panel...

Бренд: NEC Страницы: 35

LCD8205 - MultiSync - 82" LCD Flat Panel...

Бренд: NEC Страницы: 2

Бренд: Quirk Logic Страницы: 11

Бренд: Levita Страницы: 28

Бренд: Joycare Страницы: 68

ECX-1200 Series

Бренд: Vecom Страницы: 13

Бренд: Westinghouse Страницы: 27

Бренд: vivocare Страницы: 120

Бренд: AIRxTOUCH Страницы: 22

Бренд: EUTECH INSTRUMENTS Страницы: 44

Planar LookThru LO55

Бренд: Leyard Страницы: 23

Бренд: ViewSonic Страницы: 6

Бренд: Hyvision Страницы: 15

Бренд: Envision Страницы: 22

Бренд: Symphony Страницы: 7

Бренд: turck Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды