background image

22

Viewing 3D images

You can enjoy viewing 3D images with contents or programmes compatible with 3D effect by using the 3D eyewear 
(optional).

Note:

You need the 3D IR TRANSMITTER (optional) and the 3D eyewear (optional) to view the 3D images on this display.
For further information, see the instruction manuals of the 3D IR TRANSMITTER and the 3D eyewear.
This display supports “Frame Sequential

*1

”, “Side by Side

*2

”, “Top and Bottom

*3

” and “Simultaneous

*4

” 3D formats.

*1:  The 3D format that the images for the left and right eyes are recorded with the high de nition quality and alternately played back

*2, *3: See “Table of images that can be seen for each 3D Picture Format and the source image format” on page 23.
*4:  To view “Simultaneous” 3D images, one of the following terminal boards should be installed:

Dual HD-SDI Terminal Board for 3D (TY-FB30DHD3D), Dual DVI-D Terminal Board for 3D (TY-FB30DD3D)

To view the 3D images

To view the contents of the Frame Sequential format (ex. 3D-compatible Blu-ray Disc, etc.) with 3D effect

Connect the 3D-compatible player via an HDMI cable (see page 12) and playback the contents.
•  Use fully wired HDMI compliant cable.
•  For the settings of the player, read the manual of the player.
•  If you use the non 3D-compatible player, the images will be displayed without 3D effect.

To view the contents of 3D formats other than Frame Sequential with 3D effect.

Match the picture format in “3D Picture Format” (see page 35) before viewing.
•  You can view “Side by Side” and “Top and Bottom” with 3D effect even if you use the non 3D-compatible player.
•  Please consult the suppliers of contents or programmes for availability of this service.

 Turn the 3D Eyewear on

    •  See the instruction manual of 3D eyewear for handling.

 Put on the 3D Eyewear
 Watch the 3D images

Notes:

•  If the room is lit by  uorescent lights and light appears to  icker when using the 3D Eyewear, switch off the 

 uorescent light. Alternatively, please set “3D Refresh Rate” to “100Hz” or “120Hz” whichever reduces  icker. (see 
page 50)

•  3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.
•  Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as 

computer screens, digital clocks or calculators, etc.) may be dif cult to see while wearing the 3D Eyewear.

•  Do not use the 3D Eyewear as sunglasses.
•  3D effects may be perceived differently depending on the person.

Содержание TH-42PF30W









































































Отзывы: