53
Searching...
“Searching...” is displayed during the input search.
<@@
Set the input to search when “Priority” is selected.
(NONE)
VIDEO
Component/RGB
PC
DVI
@J@:==@$
HDMI1
HDMI2
Note:
+ This menu is available only when “Input lock” is “Off”. (see page 51)
RS-232C/LAN Information Timing
Set up the informing manner for no signal or temperature rising.
While RS232C controls: Warning or error message sent on the display atuomatically.
While LAN controls: Acquire the warning or error message from the display.
RS-232C/LAN Information Timing
No Signal Warning Timing
No Signal Warning
No Signal Error
Temperature Warning
No Signal Error Timing
Temperature Warning Value
Temperature Warning Release Value
5min
On
On
On
10min
55°C
52°C
Press ACTION ( ) button
Options
2/3
Initial Power Mode
Off-timer function
ID select
Serial ID
Remote ID
Studio W/B
LAN Control Protocol
RS-232C/LAN Information Timing
Normal
Enable
0
Off
Off
Protocol 1
Serial Daisy Chain
---
Off
1
select
2
adjust
No Signal Warning
If set to “On”, the display sends out the no signal warning.
No Signal Warning Timing
Set up the detecting time for no signal warning.
No Signal Error
If set to “On”, the display sends out the no signal error.
No Signal Error Timing
Set up the detecting time for no signal
HUURU
.
Note:
The “No Signal Error Timing” cannot be set shorter than “No Signal Warning Timing”.
Temperature Warning
If set to “On”, the display sends out the warning temperature.
Temperature Warning Value
Set up the detecting temperature for temperature warning.
Temperature Warning Release Value
Set up the temperature to release the temperature warning.
Options Adjustments