Error Code
Error Description
Cause
Countermeasure
8067
No vacancy in MSG processing queue
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
8069
Sector information setting error
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
806D
TKI table error
software
Either format the SD-card, or replace it.
806E
Insufficient stream error
software
Either format the SD-card, or replace it.
8080
Argument error
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
8089
ACORE not initialized
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
808A
No SMUTE CB wait
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
808C
BG Buffer Over
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
8093
ACORE not initialized
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
8095
BG Request Nothing
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
8098
code check error
Data
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
809C
No READY interruption at BG processing
Hardware
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
809D
No CHGACK interruption at BG processing
Hardware
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
80A2
msg transmission buffer full
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
5002
Device key Acquisition failure
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
5003
Dummy mark failure
Data
Check the main PCB´s IC4 and peripheral circuitry.
F001
WARNING occurred at ACORE
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
F002
ERROR occurred at ACORE
Hardware/software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
F003
RVCI software error (debug)
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
F004
CHG PARAM fails to change
Hardware
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
F005
No READY interruption
Hardware
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
19
SV-SD100VEB / SV-SD100VEG / SV-SD100VGC / SV-SD100VGK / SV-SD100VGN / SV-SD100VPP
Содержание SV-SD100VEB
