Fig.S20
8.15. SERVICE 13: Device Check
Checks for malfunctions at the main PCB´s IC8 and IC4, and
peripheral circuitry.
1. Execute the "8.3 SERVICE 1: EL Display Mode Switching"
procedure so that EL is always ON.
2. Execute the SERVICE 13 menu as described in section 8.2
(Entering The Service Mode).
·
The device check screen displays.
·
The check results (Fig.S21) then display approximately
15 seconds later.
* Checks occur in the SRAM check, ASIC check, A-Core
check order. If an error is found, the check operation
stops at that point.
3. Open the battery cover to end the procedure.
Fig.S21
8.15.1. Explanation Of Device Check
Results
Display
Content
Symptom/Condition
Cause & Countermeasure
SRAM1 : NG Possible cause: Main PCB
IC4 malfunction.
Check the main PCB IC4
and peripheral circuitry.
SRAM2 : NG Possible cause: Main PCB
IC8 malfunction.
Check the main PCB IC8
and peripheral circuitry.
ASIC : NG
Possible cause: Main PCB
IC8 malfunction.
Check the main PCB IC8
and peripheral circuitry.
A-CORE : NG Possible cause: Main PCB
IC8 malfunction.
Check the main PCB IC8
and peripheral circuitry.
As the IC4 (Flash ROM) cannot be replaced independently,
replace the main PCB with a device key loaded PCB
(REP3902A-M).
Note: Main PCB replacement should be performed with
reference to section 7 (Precautions When Executing The
Main PCB Replacement Service).
8.16. Error Code Table
Error Code
Error Description
Cause
Countermeasure
1001
SD card initialization failure
Hardware/software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1002
MBR reading error (normal)
Hardware/software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1003
FAT reading error (normal)
Data
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1004
DIR entry reading error (normal)
Hardware/software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1005
MBR logic error (normal)
Data
Format the SD-card at the audio player.
1006
FAT logic error (normal)
Data
Format the SD-card at the audio player.
1008
No SD AUDIO directory (normal)
Data
Replace with an SD-card that contains a recording
1009
MBR reading error (secure)
Hardware/software
Replace the SD-card with another card. If the error
persists, check the main PCB´s IC4 and peripheral
circuitry.
100A
FAT reading error (secure)
Hardware/software
Replace the SD-card with another card. If the error
persists, check the main PCB´s IC4 and peripheral
circuitry.
17
SV-SD100VEB / SV-SD100VEG / SV-SD100VGC / SV-SD100VGK / SV-SD100VGN / SV-SD100VPP
Содержание SV-SD100VEB
