Panasonic SP22P, Руководство по эксплуатации

Страница: 38 / 62

Page 28
Mask/Paste Recog
3. BoardSide/MaskSide Block data
Each block data for board and mask can be switched by clicking BoardSide or MaskSide .
a. Block
It shows each block No. Block 1 and block 2 are used also for mask recognition. So, be sure to set
them so that they will be located diagonally and the distance between them will be long.
2block 5block
b. PasteRecog
Choose whether to use the solder recognition function.
ON : Solder is recognized.
OFF : Solder is not recognized.
Positioning: Solder is recognized.
When you perform the printing condition check of machine adjustment, the deviation
quantity of solder is calculated and the offset data of the printing position check
position is corrected.
c. 1pt/1pair
Choose 1-point recognition or 1-pair recognition for each block.
Unless the precision is especially required, set 1-point recognition.
d. 1pt/1pairX, 1pt/1pairY
Input the coordinates from the board origin, as the recognition point of the first point (pair).
e. 1pairX, 1pairY
When you choose 1-pair recognition, input the other recognition point.
1
2
1
2
4
3
5
1 point
1 pair
1 point 1 pair
A
point
A
point
B
point
A
point
B point
A point
193C-E-PMA01-A03-01
193C-042E