Note:
1. After replacing the HDD, press SELECT button on the unit in this
mode. Only Total elapsed "HDD Active" time (in hours) will be cleared
to 0.
2. FAN ACTIVE displayed on the TV monitor shows the total elapsed
"Fan Locked" time (This is a indication error). It can not be cleared to 0.
3. To release from Usage Screen Mode, press any operation button on
the unit in this mode. The unit will return to normal operation mode.
5.1.8. HOW TO INITIALIZE MEMORY IC
After the Memory IC (IC6001) or Main C.B.A. is replaced, be sure to set the Memory IC to Default values
as shown in "Memory IC Reference Table" below.
1. Press and hold STOP, VOL -, and EXIT buttons on the unit together
over 5 seconds.
The adjustment overlay will appear for entering Enter EVR Adjustment
mode.
Fig. 4-1
2. Set the Default value for all Control functions using a remote control
as shown in "Memory IC Reference Table."
Note:
For Selecting Control functions and setting Default value, refer to "
HOW TO ENTER EVR ADJUSTMENT MODE
" in ELECTRICAL
ADJUSTMENT procedures.
Fig. 4-2
14
www.manualscenter.com
Содержание ShowStopper PV-SS2710
