34
ª
Notes on the SD Memory Card Write-
Protect Switch
≥
The SD Memory Card has a write-protect switch. Sliding
the switch to [LOCK] prevents the recording of data to
the card as well as the deletion of data from the card.
Sliding back the switch permits such operations.
ª
Cautions for Storage
Before storing the SD Multi AV Device, take the Card
out and detach the Battery.
Store all the components in a dry place with a relatively
stable temperature.
(Recommended Temperature:15 to 25
o
C, Recommended
Humidity:40 to 60%)
SD Multi AV Device
≥
Wrap it with a soft cloth to prevent dust from getting into
the SD Multi AV Device.
≥
Do not leave the SD Multi AV Device in places that
expose it to high temperature.
Battery
≥
Extremely high temperatures or low temperatures will
shorten the life of the Battery.
≥
If the Battery is kept in smoky or dusty places, the
terminals may rust and cause malfunctions.
≥
Do not allow the Battery terminals to come in
contact with metal objects (such as necklaces,
hairpins, etc.) This can result in a short circuit or
heat generation and, if you touch the Battery in this
condition, you may be badly burned.
≥
Store the Battery in a completely discharged state. To
store the Battery for a long period of time, we
recommend you charge it once every year and store it
again after you completely use up the charged capacity.
Card
≥
When the Card is being read, do not remove the Card,
turn off the power, or subject it to vibration or impact.
≥
Do not leave the Card in places where there is high
temperature or direct sunlight, or where electromagnetic
waves or static electricity are easily generated.
≥
Do not bend or drop the Card. The Card or the recorded
content may be damaged.
≥
After use, be sure to remove the Card from the SD Multi
AV Device.
≥
After usage, store the supplied SD Memory Card in the
enclosed bag.
≥
Do not touch the terminals on the back of the Card with
your fingers. Do not allow dirt, dust or water to enter it.
ª
Fogging of lens
Turn off the power and leave the SD Multi AV Device as it
is for an hour or so. When a temperature equilibrium is
reached, the fogging will naturally disappear.
ª
State of Power Lamp while charging
The Power Lamp flashes while charging. (Flashes approx.
every two seconds when charging is normal.)
When the Power Lamps flashes more quickly or slowly (or
tuns off), some abnormality may have happened.
The flashing speed suggests the following states.
Flashing approx. every 0.5 seconds:
≥
The SD Multi AV Device, battery or AC adaptor may be
defective. Contact your nearest Panasonic dealer.
Flashing approx. every six seconds:
≥
The ambient temperature or that of the battery itself is
too high or too low. Charging proceeds, but will take a
longer time.
Turning off:
Charging is completed.
If the Power Lamp turns off when charging is not
completed, the following reasons are probable.
≥
The ambient temperature or that of the battery itself is
too high or too low. Wait until the proper temperature is
reached and charge the Battery again.
≥
The AC Adaptor is probably defective. Contact your
nearest Panasonic dealer.
