8
Turning the Power ON
1
Install the battery or plug in the AC adaptor. (
l
6)
2
Hold down the [
] button for two seconds or more.
≥
The SD Multi AV Device is turned on.
≥
The message [PLEASE WAIT] is displayed for a while and then the
mode selection screen will be displayed.
≥
≥
If the device is not used for 10 minutes or longer , the power is
automatically turned off. Press the power button again to turn it
back on.
ª
Turning the Power OFF
While the Power is on, hold down the [
] button for two seconds
or more.
Selecting Operation Modes
Select a desired mode on the mode selection screen.
1
Press the [MODE] Button.
≥
The mode selection screen
1
appears.
≥
The mode selection screen also appears when the power is
turned on.
2
Press the [MODE] Button to select [REC] or [PLAY].
≥
Alternates between [REC] and [PLAY] by a push.
3
Move the Jog Lever up or down to select a desired
mode.
4
Press down the centre of the Jog Lever
2
.
≥
The mode selection screen disappears, and the selected mode is
now set.
ª
About the Operation Mode
Seven operation modes are provided as follows.
≥
Moving picture (MPEG4 format) record mode [REC>>MPEG4]
≥
Moving picture (MPEG4 format) play mode [PLAY>>MPEG4]
≥
Still picture (JPEG format still picture) record mode [REC>>PICTURE]
≥
Still picture (JPEG format still picture) play mode [PLAY>>PICTURE]
≥
Sound (VOICE format) record mode [REC>>VOICE]
≥
Sound (VOICE format) play mode [PLAY>>VOICE]
≥
Music (MPEG2-AAC music/ MP3 format) play mode [PLAY>>MUSIC]
/
MENU
2
MODE/
VO
L
VO
L
+
-
REC
PLAY
PUSH/SET
SELECT
MPEG4
PICTURE
VOICE
1
1,2
3,4
2